MycGuard™-2 Solution (500×), for Disinfecting Ordinary Water Bath



Mycoplasma contamination often occurs during the cell culture process, but as it’s too small and difficult to be detected by the naked eye and microscopic equipment, so the mycoplasma contamination is often difficult to be found when it occurs. This undoubtedly increases the difficulty of the mycoplasma detection and removal, so it is particularly important to do a good job in the prevention of mycoplasma.

Not only the materials or places such as cell culture plate, culture reagent, super clean table or biosafety cabinet are easy to be contaminated by the mycoplasma, the water dish in the cell incubator and water bath is also the potential environment that may cause mycoplasma pollution. In order to protect your cells from the influence of mycoplasma, in addition to providing the direct removal reagents for mycoplasma, YEASEN also provided the Mycoplasma prophylaxis reagents to prevent mycoplasma contamination of normal cells, which included preventive reagent (directly added into the cell culture medium), preventive spray, preventive reagent for water dish in cell incubator and water bath (directly added in proportion).

This product is a mycoplasma preventive reagent for water bath. It is provided in the form of 500× concentrated solution. It is recommended to clean the water bath first and then add the diluted (1×) preventive reagent.


  • Mycoplasma prevention in the water bath
  • Broad spectrum activity
  • Effective at low concentration


  • Mycoplasma Prevention


Components No. Name 40610ES60
40610 MycGuard™-2 Solution (500×), for Disinfecting Ordinary Water Bath 100 mL

Shipping and Storage

The product is shipped with an ice bag and dry ice. It can be stored at -15℃ ~ -25℃ for 1 year. Please note to protect from the light for long-term storage.

Citations & References:
COA Please fill out the COA application form

Catalog No.:*


phone Number:*